News & Events

Winstar WF70A2TIFGDHGV

Winstar WF70A2TIFGDHGV#

New in April 2020

WF70A2TIFGDHGV is a 7 inch supporting HDMI (Only DVI) signal TFT-LCD module with Projected Capacitive Touch Panel (PCAP); it's made of WVGA 800x480 resolution. WF70A2TIFGDHGV comes with a control board which supports HDMI signal interface and a 40-pin GPIO connector on board; it is designed to make Raspberry Pi usage become easily. This display has a USB interface Capacitive Touch Screen overlay on TFT panel. We designed a connector (P/N WWHDMI-00#) and USB cable (P/N OTP1XXXXXXXXXXXX0155) for option, the customers can use it to connect WF70A2TIFGDHGV module with your Raspberry Pi directly. Please note, this part no. WF70A2TIFGDHGV does not include any HDMI connector or USB cable.

WF70A2TIFGDHGV is built in with TFP401 Controller IC convert signal to support HDMI (Only DVI) signal interface, as to the PCAP (CTP) IC is FT5426, it supports USB interface. The supply voltage for LCM (VDD) is typical value 5V. It is featured with Glare surface glass, view direction 12 o'clock, gray scale inversion 6 o'clock.

WF70A2TIFGDHGV Specifications
WF70A2TIFGDHGV Dimension
Size 7 inch
Dot Matrix 800 x RGB x 480(TFT)
Module dimension 165.0(W) x 100(H) x 26.6(D) mm
Active Area 154.08 x 85.92 mm
Dot pitch 0.0642 x 0.179 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Controller IC TFP401 or equivalent
Backlight Type LED, Normally White
TFT Interface Support HDMI Connector
PCAP IC FT5426 or Equivalent
PCAP Interface USB
PCAP FW Version 3
Touch Panel With PCAP
Surface Glare
1 product(s) found
Product detail:
Sort by:
Loading
Loading