New in November 2019
WEO025664A-Hotbar soldering version is a graphic COG OLED display which is made of 256x64 pixels, diagonal size 2.08 inch. WEO025664A Hotbar version is built in with SSD1362 driver IC; it can communicate via 6800/8080 8-bit parallel, I2C, 3-Wire and 4-Wire SPI interface; it supports 4 bits grayscale image. The supply voltage for logic of WEO025664A is 3V supply, 1/64 duty cycle, display with 50% check board current is 15mA@ 12Vcc (typical value). This OLED module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.
WEO025664A-Hotbar version is directly solder flex tail for super-thin profile. This COG structure OLED module is ultra thin 1.61 mm; lightweight and low power consumption. It is suitable for smart home application, meter device, personal care appliance, health device, etc. Winstar provides ZIF FPC and Hotbar versions for customers to choose the suitable module for your application.
|Dot Matrix||256 x 64 dots|
|Module dimension||60.5 x 19.0 x 1.61 mm|
|Active Area||51.18 x 12.78 mm|
|Pixel Size||0.18 x 0.18 mm|
|Pixel Pitch||0.2 x 0.2 mm|
|Display Mode||Passive Matrix|
|Drive Duty||1/64 Duty|
|Gray Scale||4 Bits|
|Interface||3-Wire and 4-Wire SPI, I2C, 6800, 8080|
WEO025664AWAP3N00H00 PMOLED with Hot Bar, Graphic 265x64 Dots, Color White, Module dimensions 60.5x19mm; Ultra thinshow more show lessPMOLED with Hot Bar, Graphic 265x64 Dots, Color White, Module dimensions 60.5x19mm; Ultra thinStock available on request