Electronic Enclosures & Housings

Terminal guards, with holes, 5.08 Easy assembly through snap-in installation of the case parts. Version: 9 poles (designed to allow the use of terminals, block 5.08). Supply: 1 pc each (max. number see enclosure).

Holder L Special holder for SMART-CASE L for safe storing of cable-connected or wireless remote controls. Fixing at the wall or other surfaces by commercial screws with head diameter 5.3 - 8.2 mm. The contour in the rear facilitates receiving also SMART-CASE L with clip. Supply: 1 holder.

RAILTEC C, 2 modules, Vers. III Enclosure with 2 sides open for connection. Fast and simple locking capability onto DIN EN 60715 (TH35). Bottom part with fastening pillars. Vertical and horizontal guides for assembling the PCBs. Easy assembly through snap-in installation of the case parts. Frame, front panel, front lid convex see accessories. Version III: front open, connection side with extended case wall. Supply: 1 bottom part, 2 clips, 1 top part.

Intermediate ring S For 2 mm additional installation height. Easy to handle: simply insert between bottom and top part and screw the case together. Note: IR function only possible with enclosure in PMMA. Supply: 1 intermediate ring.

RAILTEC C, 4 modules, Vers. II Enclosure with 2 sides open for connection - for max. 2 terminal guards (accessories). Fast and simple locking capability onto DIN EN 60715 (TH35). Bottom part with fastening pillars. Vertical and horizontal guides for assembling the PCBs. Easy assembly through snap-in installation of the case parts. Terminal guards, frame, front panel, front lid convex see accessories. Version II: front open, connection side with free through passage, with ventilations slots. Supply: 1 bottom part, 2 clips

BODY-CASE M, with recess

Set of screws Screw kit for mounting PCBs. Diameter 2.5 x 6 mm, type PZ1. Supply: 4 screws.

RAILTEC C, 9 modules, Vers. II Enclosure with 2 sides open for connection - for max. 6 terminal guards (accessories). Fast and simple locking capability onto DIN EN 60715 (TH35). Bottom part with fastening pillars. Vertical and horizontal guides for assembling the PCBs. Easy assembly through snap-in installation of the case parts. Version II: front open*, connection side with free through passage, with ventilations slots. Supply: 1 bottom part, 3 clips, 1 top part. (*a ridge gives more stability during transport-easily

Combi-Clip Serves as a clip and / or wall suspension. Assembly oriented towards the length or width (size S towards the length only). For a battery exchange, the clip can easily be removed. Two mounting holes diameter 4.2 mm necessary. Supply: 1 set.

Sealing kit M Application: for increasing the protection class of DATEC-MOBIL-BOX M. Supply: 2 sealings, 4 sealing rings.