OKW Enclosures

Diameter (mm)

Clear

PCB Base Width (mm)

Clear
2747 product(s) found
Product detail:
Sort by:
  • B6802113 Terminal guards, with holes, 5.08 Easy assembly through snap-in installation of the case parts. Version: 9 poles (designed to allow the use of terminals, block 5.08). Supply: 1 pc each (max. number see enclosure).
    Terminal guards, with holes, 5.08 Easy assembly through snap-in installation of the case parts. Version: 9 poles (designed to allow the use of terminals, block 5.08). Supply: 1 pc each (max. number see enclosure).
    show more show less
    1400 in stock
  • A2640068 ROUND KNOB 40, with line Suitable for rotary potentiometer with round shaft ends according to DIN 41591. Collet system for convenient knob assembly from the front and simple adjustment (with adjustment key - sep. article). Continuous center hole. Black marking. Supply: 1 round knob.
    ROUND KNOB 40, with line Suitable for rotary potentiometer with round shaft ends according to DIN 41591. Collet system for convenient knob assembly from the front and simple adjustment (with adjustment key - sep. article). Continuous center hole. Black marking. Supply: 1 round knob.
    show more show less
    1002 in stock
  • B6701104 RAILTEC C, 2 modules, Vers. III Enclosure with 2 sides open for connection. Fast and simple locking capability onto DIN EN 60715 (TH35). Bottom part with fastening pillars. Vertical and horizontal guides for assembling the PCBs. Easy assembly through snap-in installation of the case parts. Frame, front panel, front lid convex see accessories. Version III: front open, connection side with extended case wall. Supply: 1 bottom part, 2 clips, 1 top part.
    RAILTEC C, 2 modules, Vers. III Enclosure with 2 sides open for connection. Fast and simple locking capability onto DIN EN 60715 (TH35). Bottom part with fastening pillars. Vertical and horizontal guides for assembling the PCBs. Easy assembly through snap-in installation of the case parts. Frame, front panel, front lid convex see accessories. Version III: front open, connection side with extended case wall. Supply: 1 bottom part, 2 clips, 1 top part.
    show more show less
    300 in stock
  • A0306031 Self-tapping screws 3 x 6 mm Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars. Supply: 1 self-tapping screw.
    Self-tapping screws 3 x 6 mm Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars. Supply: 1 self-tapping screw.
    show more show less
    89 in stock
  • B6800650 Terminal block, block 5.08 PCB terminal block, 5.08. 3-pin. Supply: 1 piece.
    Terminal block, block 5.08 PCB terminal block, 5.08. 3-pin. Supply: 1 piece.
    show more show less
    50 in stock
  • B1604207 BODY-CASE M, with recess
    BODY-CASE M, with recess
    show more show less
    50 in stock
  • A9408336 SHELL-TYPE CASES V 155, Vers. IV Two-part case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base. Version IV: with battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA). Supply: 1 top and base part, battery compartment lid, assembly kit.
    SHELL-TYPE CASES V 155, Vers. IV Two-part case with open front. Front panel (as accessory) can be inserted into the front guide grooves. Guide ridges and fastening pillars for mounting of PCBs in top and base. Version IV: with battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cells (AA). Supply: 1 top and base part, battery compartment lid, assembly kit.
    show more show less
    50 in stock
  • B6706102 RAILTEC C, 9 modules, Vers. II Enclosure with 2 sides open for connection - for max. 6 terminal guards (accessories). Fast and simple locking capability onto DIN EN 60715 (TH35). Bottom part with fastening pillars. Vertical and horizontal guides for assembling the PCBs. Easy assembly through snap-in installation of the case parts. Version II: front open*, connection side with free through passage, with ventilations slots. Supply: 1 bottom part, 3 clips, 1 top part. (*a ridge gives more stability during transport-easily
    RAILTEC C, 9 modules, Vers. II Enclosure with 2 sides open for connection - for max. 6 terminal guards (accessories). Fast and simple locking capability onto DIN EN 60715 (TH35). Bottom part with fastening pillars. Vertical and horizontal guides for assembling the PCBs. Easy assembly through snap-in installation of the case parts. Version II: front open*, connection side with free through passage, with ventilations slots. Supply: 1 bottom part, 3 clips, 1 top part. (*a ridge gives more stability during transport-easily
    show more show less
    38 in stock
  • B4013117 DATEC-TERMINAL S Basic case with ergonomically inclined operating area can be used with profile plate, cover or front panel. Suitable to accommodate Eurocards 100 x 160 mm. Supply: 1 basic housing, 4 screws, 4 non slip feet, 1 sealing.
    DATEC-TERMINAL S Basic case with ergonomically inclined operating area can be used with profile plate, cover or front panel. Suitable to accommodate Eurocards 100 x 160 mm. Supply: 1 basic housing, 4 screws, 4 non slip feet, 1 sealing.
    show more show less
    25 in stock
  • B6703102 RAILTEC C, 4 modules, Vers. II Enclosure with 2 sides open for connection - for max. 2 terminal guards (accessories). Fast and simple locking capability onto DIN EN 60715 (TH35). Bottom part with fastening pillars. Vertical and horizontal guides for assembling the PCBs. Easy assembly through snap-in installation of the case parts. Terminal guards, frame, front panel, front lid convex see accessories. Version II: front open, connection side with free through passage, with ventilations slots. Supply: 1 bottom part, 2 clips
    RAILTEC C, 4 modules, Vers. II Enclosure with 2 sides open for connection - for max. 2 terminal guards (accessories). Fast and simple locking capability onto DIN EN 60715 (TH35). Bottom part with fastening pillars. Vertical and horizontal guides for assembling the PCBs. Easy assembly through snap-in installation of the case parts. Terminal guards, frame, front panel, front lid convex see accessories. Version II: front open, connection side with free through passage, with ventilations slots. Supply: 1 bottom part, 2 clips
    show more show less
    24 in stock
Loading
Loading