Wand Behuizingen

Bottom and top part R110 F ART-CASE Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article. Version: bottom part "level". Supply: 1 top and bottom part R110 F, assembly kit.

Sealing kit for IP65; Size 220

NET-BOX 140 Three-part enclosure with a uniform appearance thanks to concealed screw connections. Modern colour combination of light grey and lava. 2 PCB levels with 4 attachment domes each in the electronics compartment. Can also be used out of doors thanks to the high-quality ASA+PC-FR material. Supply: 1 bottom part and 1 top cover, 1 lid and 1 assembly kit.

ROBUST-BOX WIDTH 80, Vers. I Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of min. 0.8 mm for use of membrane keyboards. Supply: 2 case shells with sealing, cover strips top and bottom, assembly kit.

SOFT-CASE XL off-white RAL 9002 Unique case construction with "orientation towards the width" in pocket-format. Recessed area for membrane keyboards. Fixing possibilities for PCBs in top and bottom part. Intermediate ring as a sealing ring, impact protection (TPE-version) and more installation height as accessory. Version: without battery compartment. Supply: Top and bottom part, assembly kit.

SOFT-CASE M Unique case construction with "orientation towards the width" in pocket-format. Recessed area for membrane keyboards. Fixing possibilities for PCBs in top and bottom part. Intermediate ring as a sealing ring, impact protection (TPE-version) and more installation height as accessory. Version: without battery compartment. Supply: top and bottom part, assembly kit.

PROTEC Vers. III; Size 180, plastic enclosure

Wall suspension element; Size 180

PROTEC Vers. III; Size 220

Case shell 120, with groove Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of min. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case. Supply: 1 case shell with groove.