Handheld Behuizingen

Bottom and top part EM Assembly unit: Modern, flat styling. Easy to carry. Recessed operating area for membrane keyboards. Fixing supports for PCBs/components in the case bottom. Intermediate ring EM as separate article necessary. Supply: 1 top and bottom part EM, 1 self-tapping screw.

Bottom and top part R110 F ART-CASE Assembly unit: With bayonet lock, snapping into place. If required securing using 2 screws. Screw pillars for PCBs in bottom and top part. Screw pillars for battery compartment (acc.) in bottom part. Top part with recessed area for membrane keyboards. End piece (lid / battery compartment lid / base) required for bottom part - see separate article. Version: bottom part "level". Supply: 1 top and bottom part R110 F, assembly kit.

Battery holder The battery holder allows practically movement-free securing of the 2 x 1.5 V micro batteries, thus ensuring that the internal power supply is securely located in position. Supply: 1 battery holder, 1 self-tapping screw.

Holding clamp Design: Special holding clamp for SMART-CASE M , L and XL for attaching to tubes and corresponding suspensions. For fixing the preshaped centres in the bottom part have to be milled or punched. Supply: 1 holding clamp, assembly kit.

Belt/pocket clip Design: Special clip for SMART-CASE M and L. For fixing the preshaped centres in the bottom part have to be milled or punched. Supply: 1 Clip, assembly kit.

SOFT-CASE XL off-white RAL 9002 Unique case construction with "orientation towards the width" in pocket-format. Recessed area for membrane keyboards. Fixing possibilities for PCBs in top and bottom part. Intermediate ring as a sealing ring, impact protection (TPE-version) and more installation height as accessory. Version: without battery compartment. Supply: Top and bottom part, assembly kit.

Set of pull-relief For pull-relief of cable-connected applications. To be mounted onto the towers provided in the case. Supply: 2 preshaped pull-relief clamps, 2 self-tapping screws.

DATEC-POCKET-BOX L Design: Robust pocket box wit sealing. Recessed control area for membrane keyboards. Screw pillars prepared for mounting PCBs in the top and base. Battery compartment accessible from the outside with screwed battery compartment lid in case bottom. Battery compartment for 1 x 9 V flat battery (PP3) or 2 x 1.5 V mignon cell (AA). Supply: case-top and base, battery compartment lid, assembly kit.

SOFT-CASE M Unique case construction with "orientation towards the width" in pocket-format. Recessed area for membrane keyboards. Fixing possibilities for PCBs in top and bottom part. Intermediate ring as a sealing ring, impact protection (TPE-version) and more installation height as accessory. Version: without battery compartment. Supply: top and bottom part, assembly kit.

Carrytec M slim version