News & Events

Winstar WF70MTABHLRN0

Winstar WF70MTABHLRN0#

New in October 2020

WF70MTABHLRN0 is a 7 inch IPS M Series TFT-LCD display, made of resolution 1024x600 pixels. The M Series TFT is an "all in one system" which supports two kinds of user interfaces; the UART and SPI interface. WF70MTABHLRN0 module is featured with IPS panel which is having the advantage of wider viewing angle of Left:85 / Right:85 / Up:85 / Down:85 degree (typical), contrast ratio 800:1 (typical value), high brightness 600 nits (typical value), anti-glare surface panel, aspect Ratio 16:9. The power voltage of LCM is 5V (1.5A at least). It can be operating at temperatures from -10℃ to +70℃ and storage temperatures from -30℃ to +80℃. This 7" IPS M series have Resistive Touch Panel and Projected Capacitive Touch Panel for options.

WF70MTABHLRN0 module is built-in with microcontroller STM32F429 (CPU Frequency 180MHZ) on control board. Winstar designed an UI (user interface). By using Winstar TFT UI editing program and firmware, users can accelerate the project development.

WF70MTABHLRN0 Specifications
WF70MTABHLRN0 Dimension
Size 7.0 inch
Dot Matrix 1024 x RGB x 600 (TFT) dots
Module dimension 170.3(W) x 103.8 (H) x 20.15 (D) mm
Active area 154.2144 x 85.92 mm
Dot pitch 0.1506 x 0.1432 mm
LCD type TFT, Normally Black, Transmissive
Viewing Angle 85/85/85/85
Aspect Ratio 16:9
Backlight Type LED,Normally White
Interface Uart 19200 Baud rate/SPI
Touch Panel Without Touch Panel
Surface Anti-Glare
Operating mode Slave mode
Flash Memory Size 32M bits
SD card format FAT, exFAT
1 product(s) found
Product detail:
Sort by:
Loading
Loading