News & Events

Winstar WF70A2TIFGDHTV

Winstar WF70A2TIFGDHTV#

New in April 2020

WF70A2TIFGDHTV is a 7 inch Resistive Touch Panel TFT-LCD module which supports HDMI (Only DVI) signal; its resolution is made of WVGA 800x480 dots. WF70A2TIFGDHTV comes with a control board which supports HDMI (Only DVI) signal interface and a 40-pin GPIO connector on board; it is designed to make Raspberry Pi usage become easily. This display has a USB interface Resistive Touch Screen overlay on TFT panel. We designed a connector (P/N WWHDMI-00#) and USB cable (P/N OTP1XXXXXXXXXXXX0155) for option, the customers can use it to connect WF70A2TIFGDHTV module with your Raspberry Pi directly. Please note, this part no. WF70A2TIFGDHTV does not include any HDMI connector or USB cable.

WF70A2TIFGDHTV is built in with TFP401 Controller IC convert signal to support HDMI (Only DVI) signal interface. The supply voltage for LCM (VDD) is typical value 5V. It is featured with Anti-Glare surface glass, view direction 12 o'clock, gray scale inversion 6 o'clock, aspect ratio 16:9.

WF70A2TIFGDHTV Specifications
WF70A2TIFGDHTV Dimension
Size 7 inch
Dot Matrix 800 x RGB x 480(TFT)
Module dimension 165.0(W) x 100(H) x 26.4(D) mm
Active Area 154.08 x 85.92 mm
Dot pitch 0.0642 x 0.179 mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Aspect Ratio 16:9
Controller IC TFP401 or equivalent
Backlight Type LED, Normally White
TFT Interface Support HDMI Connector
RTP Interface USB
Touch Panel With RTP
Surface Anti-Glare
1 product(s) found
Product detail:
Sort by:
Loading
Loading