Winstar WF52ASZFSDHGX

Winstar WF52ASZFSDHGX

New in April 2019

WF52ASZFSDHGX is a 5.2” O-Film Bar Type TFT LCD module having resolution 480x128 with Projected Capacitive Touch Screen (PCAP); this TFT LCD with PCAP module only supports Raspberry Pi series. WF52ASZFSDHGX is built in with TFP401 Controller IC convert signal to HDMI interface, as to the PCAP (CTP) IC is GT911, its I2C interface convert to USB; CTP firmware version 0x99. WF52A for Raspberry PI series is also available for Resistive Touch Screen (RTP) or without Touch Screen options. Please note WF52ASZFSDHGX is only working with Raspberry Pi1 ~ Pi3/Pi3B/Pi3B+. If the customer needs to use other Raspberry Pi version which is not mentioned in the above list. Please contact us for a special module part number.

The supply voltage for LCM (VDD) of WF52ASZFSDHGX is typical value 5V. It is featured with Glare surface panel and O-Film, View Direction 6 o'clock, Gray scale inversion 12 o'clock, brightness 600 ~700 nits. It can be operating at temperatures from -20 ℃ to +70 ℃ and storage temperatures from -30 ℃ to +80 ℃.

Winstar WF52ASZFSDHGX Specifications
WF52ASZFSDHGX Dimension
Size 5.2 inch
Dot Matrix 480 x 3(RGB) x 128
Module dimension 180.0 x 75.8 x 23.94 mm
Active Area 127.152 x 33.9072 mm
Dot Pitch 0.0883 x 0.2649 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Aspect Ratio Bar Type
Backlight Type LED, Normally White
Controller IC TFP401
Interface HDMI
Touch Panel CTP / RTP Option
CTP IC GT911 or equivalent
CTP Interface USB
CTP FW Version 0x99
Surface Glare
1 product(s) found
Product detail:
Sort by:
  • WF52ASZFSDHGX# 5.2" Bar TFT, Resolution 480x128, Interface HDMI, Brightness 350nits, Touchscreen CTP, Panel technology TN, O-Film
    5.2" Bar TFT, Resolution 480x128, Interface HDMI, Brightness 350nits, Touchscreen CTP, Panel technology TN, O-Film
    show more show less
    Stock available on request
    No pricing available? Please request a quote today.
Loading
Loading