Axiomtek's PICO51R is an ultra-compact 2.5-inch pico-ITX motherboard powered by the 7th generation Intel® Core™ i7/i5/i3 or Celeron® processor. With the onboard CPU attached on the rear side of the board, the PICO51R can aid the heat-extraction process to make fanless design possible and make system integration fast.
With an innovation in the field of cable assembly, customized overmoldings are now available for samples and small batch series too. With these customized overmoldings ODU offers maximum flexibility, not to mention time and cost savings.
At Computex 2019 (Taipei Taiwan) Zebex launched a new member in the 2D scan modules. The Z-5132 is a mini-sized 2D barcode scan module, only 38 × 19 × 38.6 mm (device only). The slim size allows it to fit in small design for kiosk. The unit will be available in Q4 2019.
The new TFI line is a set of surge filters which come in compact DIP-24 (TFI 20) or 1.6” x 1” (TFI 150 and TFI 300) packages. Placed in front of any DC/DC converter the TFI clamps momentary over-voltage transients to a safe value in order to protect the DC/DC converter from being damaged.
Yeebo is glad to introduce their new world class 4.3” IPS TFT module with optional Optically bonded Projected Capacitive Touchscreen.
Custom presents the new A4 and A6 scanners, that offer high throughput (400 mm/s) and better than average data transfer (USB 3.0 at 5 Mbit/s) to support all applications, with resolutions up to 600 dpi (at 73 mm/s), along with the option of integrating with third party applications.
IceKap™ P30000 is a silicone-free, high performance thermal interface material designed for use with high performance processors (MPU, GPU, MCU). It takes advantage of a novel, new chemistry significantly reducing the potential for “pump out”.
We can’t do magic, but we will bring everything under one roof! The new System on Module (SoM) from Kontron Electronics offers concentrated computing power for visualization, Internet communication and demanding control tasks in mechanical engineering and device technology.
Axiomtek's SDM500L is powered by the onboard 8th generation Intel® Core™ processor with the Intel® Generation 9 HD Graphics chipset. This Intel® SDM-L module measures just 175 x 100 mm and a maximum z-height of 1.6 mm, which is well-suited for ultra-slim displays. The Intel® CoreTM-based high-performance SDM500L is optimized for digital signage, interactive flat panel displays, interactive touch computers and video walls.
We are pleased to announce that ODU has introduced its new MAC® PUSH-LOCK. A compact, easy-to-use, ergonomic, highly flexible connector. The new ODU-MAC® PUSH-LOCK is a housing with an easy and secure push-pull locking.
Laird and Statex have jointly released a new capability creating silver selective plating and high electrical conductivity on both sides of stretchable fabrics, thus opening new potential uses for flexible electronics. Uses will range from components found in consumer/professional wearable products to medical devices to military/aerospace and automotive-focused critical systems.
Premo has developed a new vehicle assembly flexible-pad for Wireless Charging for electric vehicles. The housing of this pad is made of magnetic powder in a polymer matrix or PBM (Polymer Bonded Magnetics). The PBM increased coupling factor “K” which is causing a high vibration and shock absorption. The mechanical dimensions have been designed based on SAE International WPT2/Z2 proposals.
Kontron is launching a new System on Module (SOM) which can already be placed on a handy baseboard if preferred. The SOM-STM32MP157 module offers concentrated computing power for visualization, Internet communication and demanding control tasks in mechanical engineering and device technology.
The smart card reader CRT-288-B with SAM Slot was designed based on 13.56 MHz technology for fast and easy integration into embedded systems. It supports ISO7816 IC card, ISO 14443 Parts 1-4 Type A and B cards and MIFARE® Classic series. Its ergonomically designed chassis allows for easy user interface, and ensures accurate and consistent card reading under all conditions.
The CHS400 is a compact DC/ DC converter from Cosel, a Japanese manufacturer of high-quality converters and power supplies. The CHS400 has an output power of 400W with output voltages - which are adjustable - of 10, 12, 15, 24, 28, 32 and 48VDC in a quarter brick housing! Meanwhile operating temperatures may rise to 100°C. Only from 80°C, in some cases from 70°C, should derating be taken into account. This converter provides a high density and high efficiency of 95%.